ISD 820 Knowledge Base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Samba 4 Compile Ubuntu 12.04 ======
===== Install dependencies =====
<file>
apt-get -y install build-essential libacl1-dev libattr1-dev libblkid-dev libgnutls-dev libreadline-dev python-dev python-dnspython gdb pkg-config libpopt-dev libldap2-dev dnsutils libbsd-dev attr krb5-user libkrb5-dev ntp acl krb5-kdc curl libcups2-dev libpam-dev libssl-dev

</file>
===== Get Source =====
<file>
mkdir -p src/arch
cd src/arch/
wget ftp://ftp.isc.org/isc/bind9/9.9.2-P1/bind-9.9.2-P1.tar.gz
wget http://samba.org/samba/ftp/stable/samba-4.0.3.tar.gz
</file>
===== Install Bind =====
<file>
cd ~/src
tar xzf arch/bind-9.9.2-P1.tar.gz  
cd bind-9.9.2-P1/
./configure --with-gssapi  --with-dlopen=yes --prefix=/usr/ --sysconfdir=/etc/named  --localstatedir=/var/named
make
make install
useradd bind
curl http://pastebin.com/raw.php?i=VnYMgAqQ | tr -d '\015' > /etc/init.d/named
chmod 755 /etc/init.d/named
update-rc.d named defaults
</file>
===== Install Samba 4 =====
<file>
cd ~/src
tar xzf arch/samba-4.0.3.tar.gz  
cd samba-4.0.3/
./configure --enable-selftest --prefix=/usr/ --sysconfdir=/etc/ --localstatedir=/var/samba  --enable-fhs
make
make install
curl http://pastebin.com/raw.php?i=etbsyCkQ | tr -d '\015' > /etc/init.d/samba4
chmod 755 /etc/init.d/samba4
update-rc.d samba4 defaults
</file>

===== /etc/init.d/named =====
<file bash /etc/init.d/named>
#! /bin/bash
#
# named       Bring up/down named service
#
# chkconfig: - 90 10
# description: Activates/Deactivates all named interfaces configured to \
#              start at boot time.
#
### BEGIN INIT INFO
# Provides:          named
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start daemon at boot time
# Description:       Enable service provided by daemon.
### END INIT INFO
# Source function library.
 
export NAMEDPATH="/usr/sbin/named"
export NAMEDOPTIONS="-u bind"
export NAMEDPID="/var/named/run/named/named.pid"
 
 
 if [ -f /etc/sysconfig/named ]; then
        . /etc/sysconfig/named
 fi
 
 CWD=$(pwd)
 prog="named"
 
 start() {
       # Attach irda device
       echo -n $"Starting $prog: "
        ${NAMEDPATH} ${NAMEDOPTIONS}
        sleep 2
        if [ "`ps ax | grep -v \"grep\" | grep   ${NAMEDPATH}`" != "" ] ; then echo -n "succuess"; else echo -n "failure"; fi
       echo
 }
 stop() {
       # Stop service.
       echo -n $"Shutting down $prog: "
        if [ -f ${NAMEDPID} ]
        then
                kill "`cat ${NAMEDPID}`"
        fi
        sleep 2
        if [ "`ps ax | grep -v \"grep\" | grep   ${NAMEDPATH}`" = "" ] ; then echo -n "succuess"; else echo -n "failure"; fi
       echo
 }
 
 # See how we were called.
 case "$1" in
 start)
        start
       ;;
 stop)
        stop
       ;;
 restart|reload)
        stop
        start
        ;;
 *)
       echo $"Usage: $0 {start|stop|restart}"
       exit 1
 esac
 
 exit 0
</file>
===== /etc/init.d/samba4 =====
<file bash /etc/init.d/samba4>
#! /bin/bash
#
# samba4       Bring up/down samba4 service
#
# chkconfig: - 90 10
# description: Activates/Deactivates all samba4 interfaces configured to \
#              start at boot time.
#
### BEGIN INIT INFO
# Provides:          samba4
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start daemon at boot time
# Description:       Enable service provided by daemon.
### END INIT INFO  
# Source function library.
 
export SAMBA4PATH="/usr/sbin/samba"
 
 if [ -f /etc/sysconfig/samba4 ]; then
        . /etc/sysconfig/samba4
 fi
 
 CWD=$(pwd)
 prog="samba4"
 
 start() {
       # Attach irda device
       echo -n $"Starting $prog: "
        ${SAMBA4PATH}
        sleep 2
        if [ "`ps ax | grep -v \"grep\" | grep   ${SAMBA4PATH}`" != "" ] ; then echo -n "succuess"; else echo -n "failure"; fi
       echo
 }
 stop() {
       # Stop service.
       echo -n $"Shutting down $prog: "
        killall samba
        sleep 2
        if [ "`ps ax | grep -v \"grep\" | grep   ${SAMBA4PATH}`" = "" ] ; then echo -n "succuess"; else echo -n "failure"; fi
       echo
 }
 status() {
         ${SAMBA4PATH} --show-build
 }
 
 # See how we were called.
 case "$1" in
 start)
        start
       ;;
 stop)
        stop
       ;;
 status)
        status irattach
        ;;
 restart|reload)
        stop
        start
        ;;
 *)
       echo $"Usage: $0 {start|stop|restart|status}"
       exit 1
 esac
 
 exit 0
</file>
ISD 820 Knowledge Base

User Tools

Site Tools

Page Tools
