Differences

This shows you the differences between two versions of the page.

--- network:freebsdvlan [2015/01/06 14:54]
tschulz
+++ network:freebsdvlan [2016/10/26 13:10]
tschulz [On the Fly]
@@ Line 1: / Line 1: @@
 ====== Tagged Vlans on FreeBSD ======
+===== On the Fly =====
+<file bash>
+ifconfig vlan_device.vlan_id create
+</file>
+===== Using rc.conf =====
 The first thing to do is to list the VLANs that will be on the **em0** adapter:
@@ Line 20: / Line 29: @@
 Now **reboot your system** or run **/etc/rc.d/netif restart** - you should now see something like this in your ifconfig output:
 <file>
-lan0.101: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
+em0.101: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         ether 00:1b:b9:8b:ca:33
         inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
@@ Line 28: / Line 37: @@
         status: active
         vlan: 101 parent interface: lan0
-lan0.102: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
+em0.102: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         ether 00:1b:b9:8b:ca:33
         inet 10.1.2.1 netmask 0xffffff00 broadcast 10.1.2.255

ISD 820 Knowledge Base