ISD 820 Knowledge Base

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Configure Port Trunking between Intel Mod Server and Extreme Switch (Untagged Vlan) ======
===== Configure Extreme Switch =====
On the Extreme switch we will be trunking **ports 11 & 12** and adding them as **untagged ports on vlan 220**
<file cmds extreme_swtich>
enable sharing 1:11 grouping 1:11-1:12
configure vlan "seb-san" add ports 1:11 untagged
</file>

===== Configure Intel Mod Server Switch =====
On the mod server we will be grouping **ports 3 and 4** then mapping **vlan 220** them as well as routing traffic from **blade ports 1.2 and 2.2** to **switch ports 3 and 4**
| Add a name to lag 2 keep the other defaults |
| {{:network:lag_config.png?200|}} |

| Add ports 3 and 4 to lag 2 |
| {{:network:lag_membership.png?200|}} |

| Enter a vlan name and number/ID |
| {{:network:vlan_props.png?200|}} |

| Add lag 2 as a member of vlan 220 | 
| {{:network:vlan_membership.png?200|}} |

| Set PVID 220 for lag 2 |
| {{:network:vlan_iface_settings.png?200|}} |

| Set PVID 220 for Server ports 1.2 and 2.2 |
| {{:network:vlan_iface_settings_2.png?200|}} |

ISD 820 Knowledge Base

User Tools

Site Tools

Page Tools