User Tools
virt:serial_port_virtual_box
Differences
This shows you the differences between two versions of the page.
|
virt:serial_port_virtual_box [2014/01/15 11:34] tschulz created |
virt:serial_port_virtual_box [2014/01/15 11:34] (current) tschulz |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| - a new device node /dev/ttyUSB[0-9] should be created | - a new device node /dev/ttyUSB[0-9] should be created | ||
| - run "chmod 777 /dev/ttyUSB0" to give everyone access to the serial port | - run "chmod 777 /dev/ttyUSB0" to give everyone access to the serial port | ||
| - | - in Virtual Box go to VM Settings -> Serial Ports. Then **enable** serial port 1, Port Number: **COM4**, Port mode: **Host Device**, Port/File Path: **/dev/ttyUSB0** | + | - in Virtual Box go to VM Settings -> Serial Ports. Then **enable** serial port 1, Port Number: **COM4**, Port mode: **Host Device**, Port/File Path: **/dev/ttyUSB0**{{:virt:vbox_serial.png?direct&100 |}} |
| - | + | ||
| - | {{:virt:vbox_serial.png?direct&100 |}} | + | |
virt/serial_port_virtual_box.1389807259.txt.gz · Last modified: 2014/01/15 11:34 by tschulz
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
